●When small amounts of water, oil, or similar substances are remained inside tested part or when it is used in a testing device which is used in combination with water-dunking, such foreign matter could contaminate the tester when air is exhausted and cause malfunction.
Such malfunction can be prevented.by setting up this exhaust valve unit close to WORK.
|Maximum Operating Pressure||800 kPa|
|Proof Pressure||1.0 MPa|
|Pilot Pressure Source||400 ～700kPa
(Applied from Air Leak Tester)
|Accessories||ilot Pressure Source
Tube Diameter: 4 mm Length: 3 m
|Outer dimensions||W116 L110 H100 mm
Including Mounting Brackets and Parts
|Applicable Leak Testers||Low and Medium Pressure Leak Testers which are applicable for External Exhaust Valve Ready|